BIOGAS E
METANO
Biogas and Methane
In biogas production and upgrading plants, thermal control is essential for the stability of biological and mechanical processes.
Sesino exchangers maintain optimal temperatures in compression and treatment systems, ensuring continuity and safety.
Types of Machines
- Anaerobic Digestion Plants
- Biogas Upgrading Units
- Biomethane Compressors
- Gas Treatment Skids
Biogas and methane plants handle wet, corrosive and often high‑pressure gases; they therefore require custom‑engineered heat exchangers that ensure efficiency, safety and continuous operation. Sesino heat exchangers for biogas, biomethane and methane cover both gas cooling in compressors and heat recovery in cogeneration and upgrading systems, with shell‑and‑tube [shell‑and‑tube link] water‑gas solutions designed according to international codes and the PED Directive.
Heat exchangers for biogas, biomethane and methane
From raw biogas to biomethane ready for grid injection or use as an advanced fuel, temperature and humidity control are essential for plant efficiency and durability. Sesino shell‑and‑tube water‑gas exchangers can be used in treatment and compression stages to cool the gas, promote moisture condensation and protect downstream equipment such as compressors, valves and upgrading systems. For compressed methane and biomethane (CNG), Sesino exchangers manage cooling between compression stages and before distribution or storage, improving safety and system stability. Their ability to operate at high pressures makes them particularly suitable for filling stations, compression skids and grid‑injection plants.
High‑pressure shell‑and‑tube water‑gas exchangers
Sesino water‑gas shell‑and‑tube exchangers for biogas, biomethane and methane are designed to handle gas‑side pressures up to 450 bar in standard versions, with the option of reaching 1000 bar in high‑pressure configurations. Construction in stainless steel (AISI 304, 316, 321) and the use of international design codes ensure mechanical strength and long life even with corrosive components and severe load cycles. Thermal and mechanical sizing is performed using dedicated software, considering heat duties, flow rates, temperatures and allowable pressure drops, so that each exchanger is tuned to the plant’s real operating conditions. This approach reduces the risk of overheating, unwanted condensation in critical points and operating issues caused by approximate sizing.
Applications: upgrading, cogeneration and compression
In biogas‑to‑biomethane upgrading plants, heat exchangers are used to control gas temperature in the various separation and purification stages, improving the efficiency of CO₂, H₂S and moisture removal processes. Sesino shell‑and‑tube water‑gas solutions can be integrated into these lines to manage both intermediate cooling and heat recovery to other circuits. In biogas‑ or biomethane‑fired cogeneration systems, Sesino exhaust‑gas shell‑and‑tube exchangers recover heat from engine flue gases, increasing overall plant efficiency. In methane and biomethane compression skids, Sesino units cool the gas between stages and after final compression, contributing to safety, efficiency and process reliability.
Design according to PED, EN and ASME
Sesino heat exchangers for biogas and methane are designed and manufactured to EN and ASME codes, with full compliance to the PED 2014/68/EU Pressure Equipment Directive. This ensures that each unit meets appropriate safety, material, thickness and test requirements for use with combustible gases in regulated plants. Where necessary, additional end‑user or country‑specific specifications can also be taken into account, simplifying approval and commissioning. For biogas/biomethane and methane operators, this translates into reliable, inspectable components with full traceability over their entire life cycle.
Custom solutions for biogas/methane skids and plants
Every biogas or biomethane plant has its own configuration and constraints: skid layout, climatic conditions, flow and pressure ranges, gas composition. Sesino develops bespoke exchangers by adapting diameters, lengths, materials, connection types, supports and accessories to integrate seamlessly with compressors, upgrading systems, CHP units and distribution stations. Joint engineering with OEMs, EPCs and plant operators allows footprint, performance and maintainability to be optimised from the outset. As a result, the heat exchanger becomes a key element of plant thermal management, contributing to operational stability, energy efficiency and long‑term cost reduction.
THIS IS AN EPIC
OVER 10O-YEAR-LONG HISTORY
I wrote these words in order to briefly summarize our over 100-yearlong history and share it with my current and past collaborators. While I did not personally experience the oldest parts of the story, from the beginning up to the 1950s, it was related to me orally or in writing by my father, Santo, and by uncle, Alfredo. The history from the late 1960s to the present, however, I have witnessed firsthand.
Gianluigi Sesino, President
A FAMILY BUSINESS
ACROSS GENERATION
On the occasion of our company’s 100th anniversary, we also celebrated
with former employees. Here in Sesino, employees also have a history of
generational continuity, so we can fully call ourselves a big family.
