Overview
The MS 84 INOX is a stainless steel water-oil shell and tube heat exchanger designed for applications with aggressive fluids. It is built in AISI 304, AISI 316L or super duplex, depending on the compatibility with the fluids involved. The tube bundle is welded to the shell, while the head and bottom covers are removable for inspection and cleaning on the tube side. Smooth, small-diameter tubes give a good balance between thermal performance and low pressure drops.
What does “84” mean?
The number refers to the shell diameter: the MS 84 has an 80 mm shell.
Stainless steel grades
Materials are listed in order of nobility, from the least to the most corrosion-resistant:
- AISI 304
- AISI 316L
- Super duplex
The choice of material depends on compatibility with the fluids used and is evaluated case by case. Contact Sesino with your fluids and operating conditions to identify the right grade.
Standard application
Oil in the shell, fresh water in the tubes, or other aggressive fluids where carbon steel, aluminium or copper would not be suitable.
Key features
• Stainless steel construction for aggressive fluids.
• Fixed tube bundle, welded to the shell.
• Removable head and bottom for inspection and cleaning on the tube side.
• Smooth small-diameter tubes: high thermal performance with low pressure drops.
• Working and test pressure 12/15 bar. Higher pressures on request.
• Exchange surface from 0.2 to 3.6 m2.
Typical uses
Industrial processes and hydraulic or lubrication circuits where fluids are chemically aggressive or where corrosion resistance and long service life are required.
FAQ
When should I choose the MS 84 INOX?
Choose it when fluids are aggressive and standard aluminium and copper units are not compatible.
Which stainless steel grade is right for me?
AISI 304, AISI 316L and super duplex are available. The grade is selected case by case, based on fluid compatibility.
Can the tube bundle be removed?
No. The bundle is welded to the shell. The head and bottom covers are removable, so the tube side can be inspected and cleaned.
What is the working pressure?
Working and test pressures are 12 and 15 bar. Higher pressures are available on request.
Working with aggressive fluids?
Send us your fluids, flow rates, temperatures and pressures, and we will recommend the right MS 84 INOX material and configuration.



