M25 S Series

M25 S Series

The brazed plate heat exchanger consists of stamped stainless steel plates that are brazed with copper alloy in a vacuum process.
In the brazing process, the plates are stacked by rotating them 180° relative to each other to create two separate flow chambers in which the fluids to be exchanged flow in opposite directions.

The maximum operating pressure is 38 bar at 100°C.

The operating temperature is between –196° and +225°C.

The maximum difference between the temperatures of the two fluids is 100°C.

Oil FlowPower (DT 25°C)in/out oil sidein/out water side
l/min kWGASGAS
20-24012-801"1"

THIS IS AN EPIC
OVER 10O-YEAR-LONG HISTORY

I wrote these words in order to briefly summarize our over 100-yearlong history and share it with my current and past collaborators. While I did not personally experience the oldest parts of the story, from the beginning up to the 1950s, it was related to me orally or in writing by my father, Santo, and by uncle, Alfredo. The history from the late 1960s to the present, however, I have witnessed firsthand.

Gianluigi Sesino, President