Gas
Compressors
Gas Compressors
In gas compression systems, heat dissipation is critical for safety and efficiency.
Sesino shell and tube exchangers are ideal for high-pressure gas cooling (intercooler/aftercooler), ensuring high thermal performance, high-pressure resistance, and long life.
Machine Types
- Multistage Piston Compressors
- High-Pressure Screw Compressors
- Industrial Gas Compression Skids
- Intercoolers/Aftercoolers for Gas Lines
Sesino heat exchangers for gas compressors are designed to safely and efficiently cool compressed gases such as methane, natural gas, hydrogen, air and gas mixtures in applications ranging from CNG/biomethane filling stations to high‑pressure industrial plants. The ability to develop custom shell‑and‑tube water‑gas exchangers sized on real process conditions makes these solutions ideal for single‑ and multi‑stage gas compressors, compression skids and treatment systems.
Shell‑and‑tube heat exchangers for gas compressors
Sesino shell‑and‑tube water‑gas exchangers are engineered specifically to cool compressed gas at the compressor outlet, reducing temperature between stages or after final compression. On the gas side they can handle pressures up to 450 bar in standard versions, with the option of reaching 1000 bar in high‑pressure designs, depending on plant requirements. Construction in AISI 304, 316 or 321 stainless steel provides excellent mechanical strength and corrosion resistance, even with aggressive gases or harsh environments. Correct gas cooling improves compressor efficiency, safety and reliability, reducing thermal stress on valves, seals and piping.
Applications: methane, CNG, biomethane and other gases
A typical application area is methane‑gas compressors for CNG and biomethane filling stations, where Sesino exchangers help control gas temperature during compression stages. In these plants, thermal control is essential to meet regulatory limits, enhance safety and optimise tank‑filling cycles. Beyond methane, Sesino shell‑and‑tube exchangers can be used for natural gas, compressed air, industrial gases and – combined with high‑pressure versions – also for hydrogen and high‑value gas mixtures. The possibility to adapt materials and internal configurations makes it easier to meet specific purity and compatibility requirements.
Design to EN, ASME, TEMA and PED certification
Heat exchangers for gas compressors are designed and built according to major international codes, such as ASME VIII Div.1 and EN 13445, and follow TEMA construction rules for pressure equipment. These references ensure that dimensions, wall thicknesses, materials and verification criteria align with best practices in the gas and Oil & Gas sectors. All units are PED‑certified, confirming compliance with the European Pressure Equipment Directive. For compressor OEMs and skid integrators, this means exchangers that are traceable, verified and ready for use in regulated plants.
Dedicated thermal and mechanical sizing
Each Sesino exchanger for gas compressors is fully sized using dedicated calculation software for both thermal and mechanical design. Thermal sizing takes into account gas flow rate, inlet/outlet temperatures, water flow rate, allowable pressure drops and operating conditions, ensuring the required cooling level with maximum energy efficiency. Mechanical sizing considers design pressures, load cycles, safety factors and applicable codes, guaranteeing structural integrity even under critical service conditions. For ultra‑high‑pressure versions, FEM (Finite Element Method) analysis is used to simulate stresses and deformation on shell, tubes and tube sheets.
Integration on skids and compressor packages
Gas compressors are often supplied as complete skids where space is limited and every component must fit the overall layout. Sesino develops water‑gas exchangers with customised diameters, lengths, connections and supports to optimise footprint and gas/water routing on the compression skid. Cooperation with OEMs and integrators from the outset allows correct positioning and mechanical interfaces to be defined early, reducing engineering time and later modifications. In this way, the exchanger is designed “together” with the compressor, improving overall system efficiency.
Reliability, safety and continuous service
In gas‑compressor applications, inadequate cooling can lead to safety issues, unexpected shutdowns and long‑term performance degradation. Sesino heat exchangers for gas compressors are engineered for high long‑term reliability, thanks to appropriate materials, accurate calculations, code compliance and built‑in inspectability and maintainability. For compressor manufacturers, EPCs and operators of CNG/biomethane stations or industrial plants, choosing Sesino heat exchangers means working with a specialist in thermal management for compressed gases, able to deliver robust, tailor‑made technical solutions.
THIS IS AN EPIC
OVER 10O-YEAR-LONG HISTORY
I wrote these words in order to briefly summarize our over 100-yearlong history and share it with my current and past collaborators. While I did not personally experience the oldest parts of the story, from the beginning up to the 1950s, it was related to me orally or in writing by my father, Santo, and by uncle, Alfredo. The history from the late 1960s to the present, however, I have witnessed firsthand.
Gianluigi Sesino, President
A FAMILY BUSINESS
ACROSS GENERATION
On the occasion of our company’s 100th anniversary, we also celebrated
with former employees. Here in Sesino, employees also have a history of
generational continuity, so we can fully call ourselves a big family.
