T60-80 CB

T60-80 CB

Overview
The T60-80 CB series is a range of compact water-oil shell and tube heat exchangers for cooling small-power systems. They have a heat exchange surface of up to 0.7 m², a brass shell and end covers, and copper tubes. They cannot be inspected on either the water or oil side, so they must be used with clean, filtered fluids.

What do T60 and T80 mean?
The number is the shell size: 60 mm for the T60 and 80 mm for the T80. CB1, CB2 and CB3 indicate increasing length and therefore power.

Key features
• Brass shell and end covers, copper tubes.
• Working pressure 12 bar, test pressure 18 bar.
• Six models: T60 CB1-CB3 and T80 CB1-CB3.
• Up to 10.5 kW (ΔTm 25 °C, oil at 46 cSt).
• Correction factors for ΔTm and oil viscosity.

Typical uses
Hydraulic power units and small oil cooling systems using industrial or mains water.

FAQ
What is the T60-80 CB series used for?
It cools hydraulic or lubrication oil with water in small-power systems.
Can it be inspected?
No. It is not inspectable on the water or oil side, so it needs clean fluids.
What is the maximum pressure?
12 bar working pressure and 18 bar test pressure.
How do I choose the model?
Based on oil flow, power to dissipate and temperature difference. Data refer to ΔTm 25 °C and oil at 46 cSt.

Need help choosing the right model? Send us your oil flow, water temperature and power requirements, and we will recommend the right T60-80 CB.


Oil FlowPower (DT 25°C)in/out oil sidein/out water side
l/min kWGASGAS
5-801-101/2" - 3/4"3/8" - 1/2"

THIS IS AN EPIC
OVER 10O-YEAR-LONG HISTORY

I wrote these words in order to briefly summarize our over 100-yearlong history and share it with my current and past collaborators. While I did not personally experience the oldest parts of the story, from the beginning up to the 1950s, it was related to me orally or in writing by my father, Santo, and by uncle, Alfredo. The history from the late 1960s to the present, however, I have witnessed firsthand.

Gianluigi Sesino, President